Air Performer 2-in-1 Purifier and Fan
AMF765/30
Pure and cozy air all year around
Air Performer cleans the air thoroughly and cools you when needed. It removes 99.97% of all unseen particles(1) and automatically adapts its powerful performance to your needs.
Thoroughly purifies rooms up to 70 m2 (2)
Air purification: up to 270m3/h Clean Air Rate (CADR) (3)
Fan Airflow: up to 1579 m3/h
HEPA filter eliminates 99.97% of all unseen particles from the air (1)
Real-time air quality feedback with smart AeraSense sensors
Cools you down with powerful clean airflow of up to 1579 m3/h
Connected to the Philips Air+ app: your smart, clean air solution
Powered by Artificial Intelligence: senses, adapts and performs automatically
(1) From the air that passes through the filter, tested with NaCl aerosol by a 3rd party laboratory.
(2) Calculated according to NRCC-54013 test standard, using cigarette smoke CADR tested according to GB/T18801-2015.
(3) CADR is tested by a certified third party lab, according GB/T18801-2015.
(2) Calculated according to NRCC-54013 test standard, using cigarette smoke CADR tested according to GB/T18801-2015.
(3) CADR is tested by a certified third party lab, according GB/T18801-2015.
Cleanse your living space like never before
NanoProtect HEPA technology not only traps pollutants, but also uses an electrostatic charge to attract them, cleaning up to 2X more air than traditional HEPA H13 filtration, with higher energy efficiency.(4)
Air Performer's 3-layer HEPA filtration system
01
Pre-filter
Covers bigger particles like hair and dust, helping to extend the lifetime of NanoProtect HEPA.
02
NanoProtect HEPA
Utilizes low resistance synthetic fibers and a special electrostatic charge to remove particles.
03
Active Carbon
Captures odors and potential harmful gases like VOC (volatile organic compounds).
NanoProtect HEPA filter
removes particles 100x smaller
than a standard HEPA filter
The filter captures up to 99.97%* of particles as small as 0.003 microns, while the standard HEPA filter captures particles of 0.3 microns.
**From the air that passes through the filter, tested with NaCl aerosol by a third-party laboratory
**From the air that passes through the filter, tested with NaCl aerosol by a third-party laboratory
0.003 microns
more than 0.003 microns
Thoroughly purifies large rooms
up to 70 m2 (2)
Distributes powerful clean airflow to every corner of the room.
Cooling
Cools you with powerful clean airflow that feels natural and pleasant. With adjustable airflow rotation of up to 350°, cool air will reach everywhere.
Clean air with less energy
Thanks to its energy-efficient design, it uses 40 W to purify the air, less than a traditional light bulb. In auto mode, the motor only runs when and for as long as needed, prolonging filter lifetime whilst saving energy.
Sleep mode with ultra-quiet operation
In sleep mode, it is quieter than a whisper with only 25 dB(A)(5) of noise level. Its light sensor detects when it is dark, turning the lights off automatically.
AeraSense sensing Technology
Real-time air quality feedback with smart AeraSense sensors
Smart AeraSense sensors continually scan the air and report in real-time, immediately reacting to any increase in pollution to improve your air quality.
Numerical display and
color ring
color ring
Smart sensor
Independently tested and certified
More than 80 years of research, innovation and dedication in air care, striving to deliver clean air and comfort to you and your family.
Tested to remove H1N1 influenza virus from the air.
Certified as allergy friendly by the European Center for Allergy Research Foundation.
Tested by iUTA research institute for 99.97% filtration of nanoparticles, as small as 0.003 microns.(1)
Products
Related products
-
- Purifies rooms up to 70m2
- 270 m3/h Clean Air Rate (CADR)
- HEPA & Active Carbon filter
- Connected to Air+ App
8000 series 3-in-1
7000 series 2-in-1
| Fan function | 1730 m3/h | 1579 m3/h |
| Heater function | | - |
| Purification (CADR) | 270 m3/h | 270 m3/h |
| Room size | Up to 70 m2 | Up to 70 m2 |
| 350° rotation | | |
| ECARF Certification | | - |
| Sensor outputs | PM 2.5, Gas, Allergens, Temperature, Humidity, Light | PM 2.5, Temperature, Humidity, Light |
| Size | Height: 106.4 cm Base diameter: 32.5 cm | Height: 106.2 cm Base diameter: 25.6 cm |
Air Purifiers
Humidifiers
Filters
How can we help you?
Frequently Asked Questions
- How does Philips Air Performer purify the air?
-
The Air Performer works by driving air through its 3-layer filtration system, cleaning the air from pollutants passing through it. Philips air purifies are proven to remove 99.97% of particles as small as 0.003 microns(1), protecting you from bacteria, virus, pollen, dust, pet dander, dust mites, mold spores, harmful gases, odors and other pollutants.
- How often should I replace the filter of Philips Air Performer?
-
Estimated lifetime of filter is 12 months*.
*The recommended service life for the device is based on a theoretical calculation of the average annual regional values of harmful air particles outdoors and daily use of the air purifier for 16 hours in automatic mode.
- What is the purification performance of Philips Air Performer?
-
The key performance indicator of an air performer is CADR (Clean Air Delivery Rate): the clean airflow generated in 1 hour. The higher CADR, the faster the cleaning. The dirtier the room, the higher the CADR must be. This performer has a CADR of 270 m3/h***
* * * CADR is tested by a certified third party lab, according GB/T18801-2015
- How does the air quality sensor of Philips Air Performer work?
-
Smart AeraSense sensors continually scan the air and report in real-time, immediately reacting to any increase in pollution to improve your air quality. Check your purifier’s digital display or app to track ultra-fine pollutants (PM2.5), temperature and humidity.
- How do I dispose of the Philips filter?
-
We recommend placing the filter in a disposable bag and following normal practice, then washing your hands for at least 20 seconds.
- What particles does Air Performer remove from the air?
-
An Air Performer protects you from bacteria, virus, pollen, dust, pet dander, dust mites, harmful gases, odors and other allergens and pollutants. It removes 99.97% of particles as small as 0.003 microns, smaller than the smallest known virus.(Corona virus is ~0.12 microns)(1)
- How do I connect my device to the Air+ app?
-
- Download and install the Philips Air+ app from the App Store or Google Play.
- Put the plug of the air performer in the power socket and turn on your air performer. The Wi-Fi indicator blinks orange for the first time.
- Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network.
- Launch the Philips Air+ app and click on “Connect a New Device” or press the “+” button at the top of the screen. Follow the onscreen instructions to connect the air purifier to your network.
- How does the AI work and how do I activate it?
-
Auto Plus mode uses Artificial Intelligence (AI) to clean the air when you need it. It integrates sensor readings, outdoor data and behavioural patterns to adapt its performance, while minimizing noise levels and energy consumption. Auto Plus mode is activated via the device settings within the Air+ app.
Get support for your
2-in-1 Air Performer
2-in-1 Air Performer
Get support for this product
Find the right filter for your purifier
(1) From the air that passes through the filter, tested with NaCl aerosol by a third-party laboratory.
(2) Calculated according to NRCC-54013 test standard, using cigarette smoke CADR tested according to GB/T18801-2015.
(3) CADR is tested by a certified third-party lab, according GB/T18801-2015.
(4) Philips air purifiers have higher Clean Air Delivery Rate and energy efficiency with a NanoProtect HEPA filter than with a HEPA H13 filter, tested to GB/T 18801.
(5) The average sound level, based on GB/T4214.1-2017 (IEC 60704-1 - 2020, MOD). The sound level may change due to the conditions in your room and the location of the device.
(2) Calculated according to NRCC-54013 test standard, using cigarette smoke CADR tested according to GB/T18801-2015.
(3) CADR is tested by a certified third-party lab, according GB/T18801-2015.
(4) Philips air purifiers have higher Clean Air Delivery Rate and energy efficiency with a NanoProtect HEPA filter than with a HEPA H13 filter, tested to GB/T 18801.
(5) The average sound level, based on GB/T4214.1-2017 (IEC 60704-1 - 2020, MOD). The sound level may change due to the conditions in your room and the location of the device.